Engineered for smart, efficient wastewater management.
Soil, waste and rainwater systems built for silence, strength and zero leakage.
Jindal SWR (Soil, Waste & Rainwater) Piping System is a complete uPVC drainage solution engineered for residential, commercial and infrastructure projects. Manufactured from premium lead-free uPVC, the system delivers leak-proof, corrosion-resistant and easy-to-install drainage performance.
Available in both Push-fit (with pre-installed rubber sealing ring) and Solvent-weld (Solfit) jointing options, the range covers 40 mm to 200 mm pipes with a complete suite of fittings — bends, tees, Ys, traps, couplers, cowls, clamps and WC connectors — for soil, waste and rainwater stacks.
Manufactured to IS 13592 : 2013 (Pipes) and IS 14735 : 1999 (Fittings). Sizes available from 40 mm to 200 mm, in Type A (ventilation & rainwater) and Type B (soil & waste) classifications.
Pipes and fittings with co-moulded rubber sealing ring (Yellow Seal) for a quick, leak-proof joint that absorbs thermal expansion — no solvent cement required.
Plain-socket pipes and fittings joined with uPVC solvent cement for a permanent, leak-tight bond — ideal for fixed underground and chase-concealed runs.
Select joint type — push-fit (with pre-installed seal) or solvent-fit — based on the system design.
Cut the pipe square and chamfer the cut end; clean both pipe end and fitting socket of dust and debris.
For push-fit: apply approved rubber lubricant and push the pipe into the socket up to the stopper mark. For solfit: apply uPVC solvent cement evenly to pipe end and socket, then join and hold for 30 seconds.
Maintain the correct slope/gradient for gravity drainage on all horizontal runs.
Support the line with recommended clamps and brackets, especially on vertical stacks.
Carry out a water/leak test to confirm leak-free installation before concealing.
SWR stands for Soil, Waste and Rainwater — covering all non-pressure drainage applications in homes, buildings and infrastructure.
Two systems: Push-fit with pre-installed rubber sealing ring for quick, leak-proof connections, and Solvent-weld (Solfit) using uPVC solvent cement for a permanent bond.
Pipes and fittings are available from 40 mm to 200 mm, suitable for small homes through to large commercial and infrastructure projects.
IS 13592 : 2013 for pipes and IS 14735 : 1999 for fittings, covering Type A (ventilation & rainwater) and Type B (soil & waste).
Yes. Jindal SWR pipes are UV-stabilised and corrosion-resistant, making them ideal for external soil, waste and rainwater stacks.
Yes. The entire Jindal SWR range is manufactured from lead-free uPVC compound.
No. Solvent cement is not recommended on push-fit joints — the tolerances will not seal and the cement can damage the rubber seal. Use only approved rubber lubricant for push-fit installation.
Yes. Jindal SWR pipes are UV-resistant; if a colour match is required, water-based paint may be used on the external surface.
With proper installation and maintenance, uPVC SWR pipes deliver a long service life of several decades in non-pressure drainage applications.
A Swept Tee has a gentle curved design that allows smooth transition of flow from horizontal to vertical, reduces impact noise, improves air circulation and prevents water curtain formation in vertical stacks — preferred for soil and waste stacks in multi-storey buildings.
Next Step
Talk to our team about sizing, pricing and project quantities — or grab the catalog and price list.
